Hello Mr Gravesen,
I wanted to thank you for your help on this project. This is a great
speaker. A lot of fun to build. The Seas T35 tweeter was used on this
project. Painting the front baffle was a new skill for me. I used spray
can paint from the local hardware store. Three coats of primer and four
coats of enamel. Sanding on the enamel went up to 2000 grit. The speaker
stand was made from left over HDF. It is filled with steel shot to help
anchor it to the floor. Same construction used for the classic 3 way
speakers. Really enjoy this speaker.
Best regards,. Mark
|