ScanSpeak
8542/9700, built by Will/Seattle |
They are the drivers/crossover/baffle of
the 8542/9700 project and the enclosure size and tuning of the studio
101. I'm an 18 year old from Seattle, WA and I've been into audio for nearly 5 years now. This is my third serious speaker that I've built entirely from scratch. Second speaker built using my new router. These use bamboo plywood, 1" thick, and solid paduak baffles 7/8". I used your trick on the edges where the baffle meets the cabinet, and cut a notch so that it looks nicer and doesn't have to be perfect, but I did it on my table saw. Completed weight is 27 pounds each.
|