Hypex FUSION FA252
Copyright 2018 © Troels Gravesen
For use with ATS-4-HE and Ellipticor-4 and FUSION-3
The short instruction here is meant for the ATS-4-HE, Ellipticor-4 and
FUSION-3 speakers. In all cases the FA252 is used as a two-channel
amplifier/DSP.
FA252 Click images to view large
Download HYPEX FUSION manual
here.
Download Hypex Filter Design
here.
Go to page 31 to read about the FUSION
modules.
Download Hypex Filter Design 4.95 software from
Hypex website.
Download actual files for your speaker here.
Install the software on your PC and -
connect FA252 to the computer and -
open HFD (Hypex Filter Design):
Click Device settings:
Preset volumes are set to 4, 2 and 0 respectively.
Un-click Device settings and you have this again
Set volume to "0" dB.
Click Filter design and you see this
When you have installed the HFD software you will have a folder in My Documents "FilterData":
Unzip your file on the memory stick and transfer the data to "FilterData".
Open file.
Chose file and click OK (you will only see the file relevant for your
speaker)
Click Upload all presets.
Connect the Hypex module to your preamplifier.