After updating my Ekta Grandes I had a pair of tweeters left over.
Better put them to use. I decided to build the Discovery W18 V3. I made
the front from a solid 40mm board. Not an easy task but it looks real
Thank you for the tip shown in the Quattro-mkII page, about make a small
groove, 1.5 x 1.5 mm, on cabinet front edges. It really saved me this
time as the front baffles shrinked some 2mm when I took them inside,
while cabinets were at the painter...
I am impressed by the sound, and with some support from a subwoofer they
Best regards, Mattias