Hello Troels,
Here is my feedback after building the Faital 3WC15 and after a few
weeks of use.
I hesitated for a long time between the Faital 15 and the Fusion 22, I
finally chose the former, I slightly deviated from your instructions on
three points:
- I recessed the midrange speakers for aesthetics, although I could
always add spacers if I want to try in the original configuration.
(Not a good idea, as this will worsen the
phase integration of midrange and tweeter. Troels Gravesen)
-I housed the crossovers in the feet so that they are more accessible, I
also think that it is good that they are not subject to the vibrations
of the speakers.
-I made the feet higher because my listening seat seems higher than
yours. (Ikea armchair?)
And I think I need to enhance them a little more.
Your site is well done, the only doubt I had was about the folding of
the Acoustilux, you answered my question quickly, thank you.
As I am short of time at the moment, I ordered the wood from Ebel, I
find the quality/price ratio very good, despite the high shipping costs.
(Germany-France, 3 packages of 25 kgs,,,)
I couldn't have done such a good job with my equipment.
I had a little problem and they were very professional in resolving it,
I will order from them again without hesitation if I make new speakers.
As for the Jantzen order, very professional too, well packaged,
processed quickly, perfect. On the other hand, the capacitor covering is
of poor quality, I find that it is not very serious given the level of
the range, it is like buying a luxury car with fragile paint. If I have
to buy capacitors outside of a kit, I won't take Jantzen for that.
I chose the most high-end kit with BE tweeters, my amplifier is an
Accuphase E5000 and I use the same brand Dp450 player.
The sound reproduction is very clear, the bass is clean and crisp, the
midrange transparent, my other speakers with SEAS Exel speakers seem a
little muffled in comparison. The level of detail is impressive.
Like others, I find a harshness in the treble with certain recordings,
some say that it takes time for the tweeters to soften, others have
switched to the fabric dome, I will still wait, maybe I I'll try the
other version of tweeter.
I think you have to pay attention to the association with the amplifier,
and to the room too. I know that mine highlights the treble, that's the
point I'm going to work on first.
The placement is also very important, I gained a lot from moving them
away from the first positioning.
Moreover, as the sound is very clean, we quickly go up to a significant
level without realizing it.
To summarize, these speakers are precise, detailed, clear, but be
careful with their implementation so that it doesn't become excessive.
This is a first return, I will write to you again to let you know about
developments.
Sincerely.
Xavier
Bonjour Troels,
Voici mon retour après avoir construit les Faital 3WC15 et après
quelques semaines d’utilisation.
J’ai longuement hésité entre les Faital 15 et les Fusion 22, j’ai
finalement choisi les premières, j’ai légèrement dévié de vos
instructions sur trois points:
- j’ai encastré les haut-parleurs médiums pour l’esthétisme, si je
pourrais toujours ajouter des entretoises si je désire essayer dans la
configuration originale.
-J’ai logé les filtres dans les pieds pour qu’ils soient plus
accessibles, je me dis aussi que c’est bien qu’ils ne soient pas soumis
aux vibrations des haut-parleurs.
-J’ai fais des pieds plus hauts car mon siège d’écoute semble plus haut
que le votre. (Fauteuil Ikea?)
Et je crois qu’il faut que je les rehausse un peu encore.
Votre site est bien fait, le seul doute que j’ai eu est sur le pliage de
l’Acoustilux, vous avez répondu rapidement à ma question, merci.
Comme je manque de temps en ce moment, j’ai commandé le bois chez Ebel,
je trouve très bon le rapport qualité/prix, malgré des frais d’envoi
élevés. (Allemagne-France, 3 colis de 25 kgs,,,)
Je n’aurais pas pu faire un aussi beau travail avec mon matériel.
J’ai eu un petit soucis et ils ont étés très professionnel pour le
résoudre, je commanderai à nouveau chez eux sans hésitations si je fais
de nouvelles enceintes.
Pour ce qui est de la commande Jantzen, très professionnels aussi, bien
emballé traité rapidement, parfait.
Par contre, l’habillage des condensateur est de mauvaise qualité, je
trouve que ce n’est pas très sérieux vu le niveaux de gamme, c’est comme
acheter une voiture de luxe avec une peinture fragile.
Si je dois acheter des condensateurs en dehors d’un kit, je ne prendrai
pas des Jantzen pour ça.
J’ai choisi de kit le plus haut de gamme avec les tweeters BE, mon
amplificateur est un Accuphase E5000 et j’utilise le lecteur de la même
marque Dp450.
La restitution sonore est d’une grande clarté, les basses sont propres
et nettes, le médium transparent, mes autres enceintes avec des haut-parleurs
SEAS Exel semblent un peu étouffées en comparaison.
Le niveau de détails est impressionnant.
Je trouve comme d’autres une dureté dans l’aigu avec certains
enregistrement, certains disent qu’il faut du temps au tweeters pour
s’adoucir, d’autres sont passés au dôme tissus, je vais encore patienter,
peut-être que j’essayerai l’autre version de tweeter.
Je pense qu’il faut faire attention à l’association avec l’amplificateur,
et à la pièce aussi. Je sais que la mienne met en avant les aigus, c’est
le point sur lequel je vais travailler en premier.
Le placement aussi est très important, j’ai beaucoup gagné à les écarter
par rapport au premier positionnement.
De plus comme le son est d’une grande propreté, on monte vite à un
niveau important sans s’en rendre compte.
Pour résumer, ces enceintes précises, détaillées, claires mais attention
à la mise en œuvre pour pas que ça ne devienne excessif.
C’est un premier retour, je vous écrirai à nouveau pour vous faire part
des évolutions.
Cordialement.
Xavier
|